SolaarCreating and editing most rules can be done in the Solaar GUI, by pressing the ‘Rule Editor’ button in the Solaar main window.
Rule processing is an experimental feature. Significant changes might be made in response to problems.
Note that rule processing only fully works under X11.
When running under Wayland with X11 libraries loaded some features will not be available.
When running under Wayland without X11 libraries loaded even more features will not be available.
Rule features known not to work under Wayland include process and mouse process conditions.
Under Wayland using keyboard groups may result in incorrect symbols being input for simulated input.
Under Wayland simulating inputs when modifier keys are pressed may result in incorrect symbols being sent.
Simulated input uses Xtest if available under X11 or uinput if the user has write access to /dev/uinput.
The easiest way to maintain write access to /dev/uinput is to use Solaar’s alternative udev rule by downloading
https://raw.githubusercontent.com/pwr-Solaar/Solaar/master/rules.d-uinput/42-logitech-unify-permissions.rules
and copying it as root into the /etc/udev/rules.d directory.
You may have to reboot your system for the write permission to be set up.
Another way to get write access to /dev/uinput is to run sudo setfacl -m u:${USER}:rw /dev/uinput
but this needs to be done every time the system is rebooted.
Logitech devices that use HID++ version 2.0 or greater produce feature-based
notifications that Solaar can process using a simple rule language. For
example, using rules Solaar can emulate an XF86_MonBrightnessDown key tap
in response to the pressing of the Brightness Down key on Craft keyboards,
which normally does not produce any input at all when the keyboard is in
Windows mode.
Solaar’s rules only trigger on HID++ notifications so device actions that
normally produce HID output have to be first be set (diverted) to
produce HID++ notifications instead of their normal behavior.
Currently Solaar can divert some mouse scroll wheels, some
mouse thumb wheels, the crown of Craft keyboards, and some keys and buttons.
If the scroll wheel, thumb wheel, crown, key, or button is
not diverted by setting the appropriate setting then no HID++ notification is
generated and rules will not be triggered by manipulating the wheel, crown, key, or button.
Look for HID++ or Diversion settings to see what
diversion can be done with your devices.
Running Solaar with the -ddd
option will show information about notifications, including their feature
name, report number, and data.
In response to a feature-based HID++ notification Solaar runs a sequence of
rules. A Rule is a sequence of components, which are either sub-rules,
conditions, or actions. Conditions and actions are dictionaries with one
entry whose key is the name of the condition or action and whose value is
the argument of the action.
If the last thing that a rule does is execute an action, no more rules are processed for the notification.
Rules are evaluated by evaluating each of their components in order. The evaluation of a rule is terminated early if a condition component evaluates to false or the last evaluated sub-component of a component is an action. A rule is false if its last evaluated component evaluates to a false value.
Not conditions take a single component and are true if their component
evaluates to a false value.
Or conditions take a sequence of components and are evaluated by
evaluating each of their components in order.
An Or condition is terminated early if a component evaluates to true or the
last evaluated sub-component of a component is an action.
A Or condition is true if its last evaluated component evaluates to a true
value. And conditions take a sequence of components are evaluated the same
as rules.
Feature conditions are if true if the name of the feature of the current
notification is their string argument.
Report conditions are if true if the report number in the current
notification is their integer argument.
Key conditions are true if the Logitech name of the current diverted key or button being pressed is their
string argument. Alternatively, if the argument is a list [name, action] where action
is either 'pressed' or 'released', the key down or key up events of name argument are
matched, respectively. Logitech key and button names are shown in the Key/Button Diversion
setting. These names are also shown in the output of solaar show in the ‘reprogrammable keys’
section. Only keys or buttons that have ‘divertable’ in their report can be diverted.
Some keyboards have Gn, Mn, or MR keys, which are diverted using the ‘Divert G Keys’ setting.
KeyIsDown conditions are true if the diverted key or button that is their string argument is currently down.
Note that this only works for diverted keys or buttons, including diverted Gn, Mn, and MR keys.
Solaar can also create special notifications in response to mouse movements on some mice.
Setting Key/Button Diversion for a key or button to Mouse Gestures causes the key or button to create a Mouse Gesture
notification for the period that the key or button is depressed.
Moving the mouse creates a mouse movement event.
Stopping the mouse for a little while and moving it again creates another mouse movement event.
Pressing a diverted key creates a key event.
When the key is released the sequence of events is sent as a synthetic notification
that can be matched with Mouse Gesture conditions.
Mouse Gesture conditions are true if the actions (mouse movements and diverted key presses) taken while a mouse gestures button is held down match the arguments of the condition.
Mouse gestures buttons can be set using the ‘Key/Button Diversion’ setting, by changing the value to Mouse Gestures'.
The arguments of a Mouse Gesture condition can be a direction, i.e., Mouse Up, Mouse Down, Mouse Left, Mouse Right, Mouse Up-left, Mouse Up-Right, Mouse Down-left, or Mouse Down-right, or the Logitech name of a key.
If the first argument is the Logitech name of a key then that argument is matched against the button that was held down to initiate mouse gesture processing.
So, for example, a Mouse Gesture condition of Mouse Up -> Mouse Up would match pressing any Mouse Gestures button, moving the mouse upwards, pausing momentarily, moving the mouse upwards again, and releasing the button.
The condition Smart Shift -> 'Mouse Down -> Back Button would match pressing the Smart Shift button (provided that it is a Mouse Gestures button!) moving the mouse downwards, clicking the Back button (provided that it is diverted!), and then releasing the Smart Shift button.
Directions and buttons can be mixed and chained together however you like.
It’s possible to create a No-op gesture by clicking ‘Delete’ on the initial Action when you first create the rule. This gesture will trigger when you simply click a Mouse Gestures button.
Modifiers conditions take either a string or a sequence of strings, which
can only be Shift, Control, Alt, and Super.
Modifiers conditions are true if their argument is the current keyboard
modifiers.
Process conditions are true if the process for focus input window
or the window’s Window manager class or instance name starts with their string argument.
MouseProcess conditions are true if the process for the window under the mouse
or the window’s Window manager class or instance name starts with their string argument.
Device conditions are true if a particular device originated the notification.
Active conditions are true if a particular device is active.
Device and Active conditions take one argument, which is the Serial number or Unit ID of a device,
as shown in Solaar’s detail pane.
Setting conditions check the value of a Solaar setting on a device.
Setting conditions take three or four arguments, depending on the setting:
the Serial number or Unit ID of a device, as shown in Solaar’s detail pane,
or null for the device that initiated rule processing;
the internal name of a setting (which can be found from solaar config
Test and TestBytes conditions are true if their test evaluates to true on the feature,
report, and data of the current notification.
TestBytes conditions can return a number instead of a boolean.
TestBytes conditions consist of a sequence of three or four integers and use the first
two to select bytes of the notification data.
Writing this kind of test condition is not trivial.
Three-element TestBytes conditions are true if the selected bytes bit-wise anded
with its third element is non-zero.
The value of these test conditions is the result of the and.
Four-element TestBytes conditions are true if the selected bytes form a signed
integer between the third and fourth elements.
The value of these conditions is the signed value of the selected bytes
if that is non-zero otherwise True.
Test conditions are mnemonic shorthands for meaningful feature,
report, and data combinations in notifications.
A crown_right test is the rotation amount of a CROWN right rotation notification.
A crown_left test is the rotation amount of a CROWN left rotation notification.
A crown_right_ratchet test is the ratchet amount of a CROWN right ratchet rotation notification.
A crown_left_ratchet test is the ratchet amount of a CROWN left ratchet rotation notification.
A crown_tap test is true for a CROWN tap notification.
A crown_start_press test is true for the start of a CROWN press notification.
A crown_stop_press test is true for the end of a CROWN press notification.
A crown_pressed test is true for a CROWN notification with the Crown pressed.
A thumb_wheel_up test is the rotation amount of a THUMB WHEEL upward rotation notification.
A thumb_wheel_down test is the rotation amount of a THUMB WHEEL downward rotation notification.
lowres_wheel_up, lowres_wheel_down, hires_wheel_up, hires_wheel_down are the
same but for LOWRES WHEEL and HIRES WHEEL.
True and False tests return True and False, respectively.
Solaar keeps track of the total signed displacement of the current thumb wheel movement.
This displacement is reset when the thumb wheel is inactive.
thumb_wheel_up and thumb_wheel_down tests take an optional integer parameter.
With a parameter the test is only true if the current thumb wheel displacement is greater than the parameter.
The displacement is then lessened by the amount of the parameter.
Setting conditions check device settings of devices, provided the device is on-line.
The first arguments to the condition are the Serial number or Unit ID of a device, as shown in Solaar’s detail pane,
or null for the device that initiated rule processing; and
the internal name of a setting (which can be found from solaar config
A KeyPress action takes either the name of an X11 key symbol, such as “a”,
a list of X11 key symbols, such as “a” or “Control+a”,
or a two-element list with the first element as above
and the second element one of ‘click’, ‘depress’, or ‘release’
and executes key actions on a simulated keyboard to produce these symbols.
Use separate KeyPress actions for multiple characters,
i.e., don’t use a single KeyPress like ‘a+b’.
The KeyPress action normally both depresses and releases (clicks) the keys,
but can also just depress the keys or just release the keys.
Use the depress or release options with extreme care,
ensuring that the depressed keys are later released.
Otherwise it may become difficult to use your system.
The keys are depressed in forward order and released in reverse order.
If a key symbol can only be produced by a shfited or level 3 keypress, e.g., “A”,
then Solaar will add keypresses to produce that keysymbol,
e.g., simulating a left shift keypress to get “A” instead of “a”.
If a key symbol is not available in the current keymap or needs other shift-like keys,
then Solaar cannot simulate it.
Under X11 Solaar can determine the current key modifiers (shift, control, etc.).
Any key symbols that correspond to these modifier keys are not depressed and released when clicking.
So if the shift key is currently down on a keyboard Solaar will not bother to simulate a shift key.
Under Wayland this check cannot be done so the net result of a KeyPress action that is not a depress or a release
and that contains modifier keys might be to release the modifier keys.
Simulating input in Linux is complex. Solaar has to try to determine which keyboard key corresponds to which input character as it cannot directly simulate inputting a key symbol. Unfortunately, this determination can go wrong in several ways and is more likely to go wrong under Wayland than under X11.
A MouseScroll action takes a sequence of two numbers and simulates a horizontal and vertical mouse scroll of these amounts.
If the previous condition in the parent rule returns a number the scroll amounts are multiplied by this number.
A MouseClick action takes a mouse button name (left, middle or right) and a positive number, and simulates that number of clicks of the specified button.
An Execute action takes a program and arguments and executes it asynchronously.
A Set action changes a Solaar setting for a device, provided that the device is on-line.
Set actions take three or four arguments, depending on the setting.
The first two are the Serial number or Unit ID of a device, as shown in Solaar’s detail pane,
or null for the device that initiated rule processing; and
the internal name of a setting (which can be found from solaar config
A Later action executes rule components later.
Later actions take an integer delay in seconds between 1 and 100 followed by a zero or more rule components that will be executed later.
Processing of the rest of the rule continues immediately.
Solaar has several built-in rules, which are run after user-created rules and so can be overridden by user-created rules.
One rule turns
Brightness Down key press notifications into XF86_MonBrightnessDown key taps
and Brightness Up key press notifications into XF86_MonBrightnessUp key taps.
Another rule makes Craft crown ratchet movements move between tabs when the crown is pressed
and up and down otherwise.
A third rule turns Craft crown ratchet movements into XF86_AudioNext or XF86_AudioPrev key taps when the crown is pressed and XF86_AudioRaiseVolume or XF86_AudioLowerVolume otherwise.
A fourth rule doubles the speed of THUMB WHEEL movements unless the Control modifier is on.
All of these rules are only active if the key or feature is diverted, of course.
Solaar reads rules from a YAML configuration file (normally ~/.config/solaar/rules.yaml).
This file contains zero or more documents, each a rule.
Here is a file with six rules:
%YAML 1.3
---
- Key: [M2, pressed]
- Set: [198E3EB8, dpi, 3000]
- Execute: [notify-send, Increased mouse speed]
...
---
- Key: [Host Switch Channel 2, pressed]
- Set: [43DAF041, change-host, 1]
- Set: [198E3EB8, change-host, 1]
- Execute: [notify-send, Switched to host 2]
...
---
- MouseGesture: [Mouse Up, Mouse Down]
- Execute: [notify-send, Locking]
- Execute: xflock4
...
- Feature: CROWN
- Process: quodlibet
- Rule: [ Test: crown_start_press, KeyPress: XF86_AudioMute ]
- Rule: [ Test: crown_pressed, Test: crown_right_ratchet, KeyPress: XF86_AudioNext ]
- Rule: [ Test: crown_pressed, Test: crown_left_ratchet, KeyPress: XF86_AudioPrev ]
- Rule: [ Test: crown_right_ratchet, KeyPress: XF86_AudioRaiseVolume ]
- Rule: [ Test: crown_left_ratchet, KeyPress: XF86_AudioLowerVolume ]
...
---
- Feature: THUMB WHEEL
- Rule: [ Modifiers: Control, Test: thumb_wheel_up, MouseScroll: [-2, 0] ]
- Rule:
- Modifiers: Control
- Test: thumb_wheel_down
- MouseScroll: [-2, 0]
- Rule: [ Or: [ Test: thumb_wheel_up, Test: thumb_wheel_down ], MouseScroll: [-1, 0] ]
...
---
- Feature: LOWRES WHEEL
- Rule: [ Or: [ Test: lowres_wheel_up, Test: lowres_wheel_down ], MouseScroll: [0, 2] ]
...
Here is an example showing how to divert the Back Button on an MX Master 3 so that pressing the button will initiate rule processing and a rule that triggers on this notification and switches the mouse to host 3 after popping up a simple notification.
